The Superior Stabilizer for

 

 

 

 

Roads - Pads - Bases - Trails - Lots 

Erosion and Dust Control

The G.M. Boston Company International. LLC

 

 

 

 

 

Home

PX 300 FAQs

Road & Pads

Trails & Paths

Dust/Erosion Control

Artificial Turf Base

Stabilization Info

Lab Tests

MSDS

Our Company

 

MATERIAL & SAFETY DATA SHEET

SECTION 1 - PRODUCT IDENTIFICATION

Product Number

PX-300

Product Description

Vinyl Acetate/Maleate Copolymer with enzymatic wetting agent

SECTION 2 PHYSICAL AND CHEMICAL PROPERTIES

Physical State:

Liquid

Color:

Milky White

Odor:

Slight Acrylic

Weight per Gallon

9.1 lbs.

Specific Gravity:

1.08

% Volatile by Weight

45

PH:

5.0

Vapor Density

Same as Water
































SECTION 3 COMPOSITION/INFORMATION ON INGREDIENTS

This Material Safety Data Sheet is prepared to comply with the United States Occupational Safety and Health Administration (OSHA) Hazard Communication 
Standard (12 CFR 1910.1200) and the Canadian Workplace Hazardous Materials Information System (WHMIS). Unlisted ingredients are not "hazardous"
 per the OSHA standard and are not found on the WHMIS ingredient disclosure list.

Chemical/CAS Number

Percent

OSHA PEL

ACGHI TLV

2-Propenoid Acid, Butyl Ester, Polymer with Ethenyl Acetate 25067-01-0

54.5

   

Water 7732-18-5

45.5

   

See Section 14 for Additional Information

     

SECTION 4 HAZARDOUS INFORMATION

Emergency Overview: No specific warnings for normal use conditions

Potential Health Effects

Eyes

Eye contact with liquid product may cause irritation

Skin

Prolonged/repeated contact with liquid product may cause irritation

Inhalation

Not an anticipated route of exposure

Ingestion

Not an anticipated route of exposure; small amounts not anticipated to be harmful

Chronic

No anticipated chronic effects

Related Carcinogen Status

This product contains no regulated levels of NTP, IARC, ACGIH, or OSHA listed carcinogens

Existing Health Conditions Affected by Exposure

No known effects on other illnesses

SECTION 5 FIRST AID MEASURES

In Eye

Flush immediately with water for 15 minutes, consult physician if irritation persists

On Skin

Wash affected area with soap & water, launder contaminated clothing before reuse

Inhaled Vapors

Remove subject to fresh air

If ingested

If able to swallow, drink 1 glass of water or milk. Do not induce vomiting & get immediate attention. Never give anything orally to an unconscious person.

SECTION 6 FIRE FIGHTING MEASURES

Flash Point Method

Non-flammable

Upper Explosive Limit/Lower Explosive Limit

Not Applicable

Autoignition Temperature

Not applicable

Appropriate Extinguishers

Non-flammable in liquid state; use water, spray, foam, dry chemical or CO2 if dry.

Special Fire Fighting Procedure

Persons exposed to product or combustion should wear self-contained breathing apparatus and wear full protective equipment

Unusual Fire and Explosive Hazards

When heated, pressure may build up in closed containers; cool the containers with water spray

Hazardous Combustion Product

Incomplete combustion may yield low molecular weight hydrocarbons , CO

SECTION 7 ACCIDENTAL RELEASE MEASURES

Soil/ Leak Procedures: Dike if necessary, contain spill with inert absorbent and transfer to containers for
disposal. Keep spilled product out of sewers, watersheds or water systems.

SECTION 8 HANDLING AND STORAGE

Wear appropriate protective clothing when working with this product

Avoid temperature extremes in storage; store in ambient temperatures

SECTION 9 EXPOSURE CONTROLS/PERSONAL PROTECTION

Eye protection

Safety glasses to avoid prospective eye contact; chemical safety goggles to avoid splashing; have eye wash facilities if eye contact is likely

Skin protection

Rubber gloves and protective clothing to prevent repeated/prolonged contact; Launder contaiiminated clothing before reuse

Respiratory Protection

Not normally required; Use NIOSH/OSHA approved respirators if required

Ventilation

General dilution ventilation

SECTION 10 STABILITY AND REACTIVITY DATA

Stability

Stable

Incompatibility

Not established

Hazardous Decomposition

Not Established

Hazardous Polymerization

Will not occur













SECTION 11 DISPOSAL CONSIDERATIONS

To the best of our knowledge, this product does not meet the definition of hazardous waste under U.S. EPA
Hazardous Waste Regulations 40 CPF 261. Solidify and dispose of in an approved landfill. Consult state,
local or provincial authorities for more restrictive requirements.

SECTION 12 TRANSPORTATION

DOT Proper Shipping Name Not Regulated

SECTION 13 REGULATORY INFORMATION

 

FEDERAL

Toxic Substances Control Act (SCA)

Section 8(b) - Inventory status

This product complies with the Toxic Substances Control Acts Inventory Requirements

SATA Title III:

Section 313

This product does not contain regulated levels of any toxic chemical subject to the reporting requirements of Section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 (SARA) and 40 CFR, pat 372

STATE

CA Proposition 65 - The Safe Drinking Water and Toxic Enforcement Act of 1986

This product does not contain chemical(s) known to the State of California to cause cancer or reproductive damage

INTERNATIONAL

WHMIS Identification/Other International Regulations/WHMIS Rating

Not WHMIS controlled
WHMIS Rating
Health: 1
Flammability: 0
Reactivity: 0
Protective Equipment: B

SECTION 14 ADDITIONAL INFORMATION

In storage, monomer vapors will migrate from the emulsion and establish an equilibrium between the head

space in the storage container and the liquid emulsion. Levels in excess of acceptable exposures can accumulate in the non-vented head 
spaces above the emulsion. All procedures appropriate for a confined space entry should be completed prior to performing any work on a bulk storage tank.

 

G.M. Boston Company Intl., LLC
412 Fullerton
Newport Beach, CA 92663
Telephone:  (562) 592-5334
Fax (949) 722-6700
 
Craig Hoad:  craighoad@gmbostoncompany.com
Greg Boston:  gboston@gmbostoncompany.com
 

HOME  |  OUR COMPANY   | PX 300 FAQs  | ROADS &  PADS  |  ARTIFICIAL TURF BASE  DUST/EROSIONCONTROL  
MSDS |  SOIL  TYPES & PX 300   |  LAB TESTS